User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Killing Spree Bad Robot's Avatar
    Join Date
    May 2014
    Posts
    128
    Country:

    Timing Out on New ACE/ What version of Pure is used in Ultimate Newnet 4?

    Hi,
    I just added ACE 1.c on my server. I keep getting kicked after 30 seconds because it can't connect due to bandwidth. However my ISP plan is 1GB down and 50 mb up. That should be enough I would think. Also, I want to add mapvote columns without Newnet. What is the version of UTPURE that Ultimate Newnet 4 uses, so I can still have the hitsounds and fws?

    Thanks!

  2. #2
    Administrator SAM's Avatar
    Join Date
    Jan 2011
    Posts
    8,296
    Country:
    Use utpure rc7g

  3. #3
    Dominating medor's Avatar
    Join Date
    Sep 2013
    Posts
    456
    Country:
    I just added ACE 1.c on my server. I keep getting kicked after 30 seconds because it can't connect due to bandwidth. However my ISP plan is 1GB down and 50 mb up. That should be enough I would think.


    For ACE ACE 1.c it's not the last take ACE 1.d and for support it's here http://www.unrealadmin.org/forums/sh...171#post172171

    What is the version of UTPURE that Ultimate Newnet 4 uses, so I can still have the hitsounds and fws?

    For Ultimate Newnet 4 you speak about UltimateNewNetv0_4 ? you can try my demo server because the hitsounds work on it http://unrealtournament.99.free.fr/f...hp?f=51&t=3485
    You can try also the UltimateNewNetv0_7_beta http://ultimateut.tk/ut_dev/


    Also, I want to add mapvote columns without Newnet.
    For what gametype i can help you to here

  4. #4
    Killing Spree Bad Robot's Avatar
    Join Date
    May 2014
    Posts
    128
    Country:
    Sam - Thanks! That version works great.

    Medor - I have installed your server system files and upgraded unn4 to unn7. Loaded up nicely. I will give it a test tonight. Thanks.

    Re:ACE Still can't connect. Tried 1b,1c,1d. Added [ACEv10d_S.ACENICHelper] bDebug=1. No luck. Maybe I should use an older 8H version? Would that still be an acceptable anti cheat? Or Anthrax 138? Thanks!

  5. #5
    Dominating medor's Avatar
    Join Date
    Sep 2013
    Posts
    456
    Country:
    Post your ACE error or kick on unrealadmin for help all

  6. #6
    Killing Spree Bad Robot's Avatar
    Join Date
    May 2014
    Posts
    128
    Country:
    Hi Medor, its the same as this.
    http://unrealteam.de/cheatergalerie/ace10.jpg

    I also tried adding ACE 8h but it stays in connecting for a long time, even while I play. Then when I switch to another map it deletes that map! I 'm going to try Ace8g just for fun.

  7. #7
    Dominating medor's Avatar
    Join Date
    Sep 2013
    Posts
    456
    Country:
    Ave you try to increase the check time from ACE ?
    InitialCheckLinger=5.000000
    InitialCheckTimeout=120.000000
    PeriodicCheckInterval=90.000000
    PeriodicCheckTimeout=120.000000

    Ave you enable UnrealTournament in your anti-virus and Firewall ?

    Ave you click install all during your first connect or download all ?
    Last edited by medor; 01-19-2017 at 05:37 PM.

  8. #8
    Killing Spree Bad Robot's Avatar
    Join Date
    May 2014
    Posts
    128
    Country:
    Hi Medor,
    I did enable UT, and install on every Ace Box. I also increased the check times. In the end, I went with AnthChecker, no 16bit, Antitweakv52, and Pure from UNN 0_4. For some reason UNN 0_7 stopped working and kept booting me.
    I even did an ACE install with a fresh UT ini. Just to see if the other programs were chocking out the bandwidth. Nope! Anyway, I've been at this for most of the day so I'm going to take a break! Thanks for your help!

  9. #9
    Administrator SAM's Avatar
    Join Date
    Jan 2011
    Posts
    8,296
    Country:
    Have you opened the ace port to TCP? Where is your server hosted. Are you behind a NAT?

  10. #10
    Dominating medor's Avatar
    Join Date
    Sep 2013
    Posts
    456
    Country:
    PureNN ave a checker you not need AnthChecker

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •